DCP-315CN
 |
Ofte stillede spørgsmål og fejlfinding |
Configure and use the Scan Key Tool (Linux)
1. Start and stop the Scan Key Tool
1.1 Start the Scan Key Tool
-
Manually
In the terminal window, type brscan-skey and then press the Enter key.
-
Automatically
Add the brscan-skey task to your operating system's autostart list.
1.2 Stop the Scan Key Tool
End the brscan-skey task using the following command:
/brscan-skey -t
2. Configuration (Optional)
2.1 The scanned data destination directory
The scanned data is saved in the "brscan" directory in each user's home directory.
2.2 Set the destination computer name
To set the destination computer name, use:
/brscan-skey -u [computer name]
Set the computer name up to 15 alphanumeric characters.
2.3 Set the password
No password is set by default. To set the password, use:
/brscan-skey -p [password]
Set the password with four numeric characters.
Your new password will be available when you restart brscan-skey.
3. Information for developers
The Scan Key Tool process is described in:
/opt/brother/scanner/brscan-skey/brscan-skey-net-0.2.0-1.cfg
To change the default process settings, edit this file.
Example:
password=
IMAGE="sh /opt/brother/scanner/brscan-skey/script/scantoimage-0.2.0-1.sh"
OCR=
EMAIL=
FILE="sh /opt/brother/scanner/brscan-skey/script/scantofile-0.2.0-1.sh"
Available scan-to features:
-
IMAGE: The Scan to Image feature.
-
OCR: The Scan to OCR feature.
-
EMAIL: The Scan to Email feature.
-
FILE: The Scan to File feature.
For more information, see the .sh file you are using (for example: scantoimage-0.2.0.1.sh).
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
