SDX1350

FAQ & Fehlerbehebung

Kontakt

The mat cannot be inserted.

Possible Causes (or Results)

Case1 :	When the mat was inserted, it was not placed under the feed rollers.
Case2 :	The mat was not loaded using the (Feed) button.
Case3 :	The feed roller is not positioned correctly.
Case4 :	The shaft is released.

Solutions

----- Case1 -----

Insert the mat so that it is placed under the feed rollers on the left and right sides of the feed slot.

(1) Guides
(2) Feed rollers

----- Case2 -----

Lightly insert the mat into the feed slot, and then press the (Feed) button.

The mat is fed in to complete the preparations for cutting.

----- Case3 -----

Adjust the position of the feed roller.
Move the feed roller to position for normal operations.
Move the feed roller toposition when the roll feeder is being used.
For details on adjusting the position of the feed roller, refer to Adjusting the Position of the Feed Roller.

(1) Shaft

(2) Feed roller
(3) Feed roller lock dial

----- Case4 -----

Lock the shaft.
For details on adjusting the position of the feed roller, refer to Adjusting the Position of the Feed Roller.

(1) Feeder release lever

Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?

Haben Sie in den Handbüchern nachgesehen?

Den Abschnitt „Handbücher“ aufrufen

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

„Kontakt“ aufrufen

Relevante Modelle

SDX1000, SDX1200, SDX1250, SDX1350, SDX1500, SDX1550, SDX2200D, SDX2250D, SDX900, SDX950, SDX950SK

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.