AZ14
|
FAQ & Fehlerbehebung |
How do I draw up the lower thread?
-
Raise the presser foot using the presser foot lever.
|
(1) Presser foot lever |
-
Lightly hold the end of the upper thread.
|
(1) Upper thread |
-
While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower
and then raise the needle.
-
Pull on the upper thread to draw up the lower thread.
|
(1) Upper thread
(2) Lower thread |
-
Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.
|
(1) Upper thread
(2) Lower thread |
Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?
Haben Sie in den Handbüchern nachgesehen?
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.