CX70PE
![]() |
FAQ & Fehlerbehebung |
The thread tension is incorrect.
- Check the machine is threaded correctly. Rethread the machine according to the instructions in the manual.
Refer to "Upper threading" of "Preparation" category.
- Check the upper thread tension set.
- Remove the bobbin and make sure it is threaded properly in the shuttle race.
Refer to "Correctly installing a bobbin. " of "Preparation" category.
- If there is any loose thread or lint in the bobbin case, please clean them with the included cleaning brush.
Refer to "Cleaning the Bobbin Case" of "General Information" category.
- Check if the combination of needle size, thread size and fabric is incorrect. Be sure to use the correct needle and thread size for the fabric you are sewing.
(Example: Denim-size 16 needle and 40-50 heavy duty thread)
Refer to " Combination of fabric, thread and needle " of "General Information" category.
Relevante Modelle
BC-2100/2300, BC-2500, CS10, CS70, CS-8060, CS-8120, CX70PE, DS-120, DS-140, FS100WT, FS-20, FS-40, FS60, FS60s, FS70WT, FS70WTs, HF27, HF37, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J17, KD144, KD40, KE14, KE20, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, PQ-1500/1500S, PQ1600S, QC-1000, RH127, RH137, RL417, RL425, SuperGalaxie 3000/3000C/3000D/3100D, X14, X17, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37