Jam Inside

The Jam Inside message appears if a paper jams occurs. When the Jam Inside 1 / Jam Inside 2 / Jam Inside 3 message appears, the following LED indications is shown on the control panel. The Error LED (Error) will blink twice and turn off for 1 second.

 

JamInside

       

Case1: Paper Jam [Outside]

  1. Leave the machine turned on for 15 minutes for the product to cool down before you touch the internal parts of the product.
     
  2. Remove the jammed paper.
     
    JamInside2
  3. Press the button to clear the error.
     
    PressButton
Click on the image to play the video instructions.

You can see the steps with video clips.
 

  • The clip is being streamed from YouTube. (Opens in a new window.)
  • Your machine may alter what is displayed on this video.

Case2: Paper Jam [Inside]

  1. Leave the machine turned on for 15 minutes for the product to cool down before you touch the internal parts of the product.
     
  2. Open the top cover.
     
    OpenTopCover
  3. Remove the jammed paper.
     
  4. Slowly take out the drum unit and toner cartridge assembly. Remove the jammed paper.
     
    JamInside1
  5. Put the drum unit and toner cartridge assembly back into the machine.
     
    PutDrum
  6. Close the top cover of the machine.
     
  7. Make sure that the paper is below the protruding section of the rear guide. Slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
     
  8. Press the button to clear the error.
     
    PressButton
Click on the image to play the video instructions.

You can see the steps with video clips.
 

  • The clip is being streamed from YouTube. (Opens in a new window.)
  • Your machine may alter what is displayed on this video.

Case3: Paper Jam [Drum Unit]

  1. Push down the lock lever and take the toner cartridge out of the drum unit. Remove the jammed paper if there is any paper left inside the drum unit.
     
    TakeOutTonerCartridge
  2. Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.
     
    TonerBack
Click on the image to play the video instructions.

You can see the steps with video clips.
 

  • The clip is being streamed from YouTube. (Opens in a new window.)
  • Your machine may alter what is displayed on this video.

Relevante FAQ

Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?

Haben Sie in den Handbüchern nachgesehen?

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

Relevante Modelle

HL-1110, HL-1112, HL-1210W, HL-1212W

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.

Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?

Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?

Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.