Clean the inside of the machine (video instructions available)
Follow the steps below to clean the inside of the machine.
NOTE: Videos and illustrations shown below are from a representative product, and may differ from your Brother machine.
DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock.
Turn off the machine's power switch. Unplug the telephone line cord first (if applicable), disconnect all cables, and then unplug the power cord from the AC power outlet.
* This movie is being streamed from YouTube. (Opening new window.)
Press the front cover release button and open the front cover. Hold the green handle of the drum unit, and then pull the drum unit out until it stops.
* This movie is being streamed from YouTube. (Opening new window.)
Turn the green lock lever at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. We recommend that you place the drum unit on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.
* This movie is being streamed from YouTube. (Opening new window.)
Be careful not to inhale toner.
Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit.
Wipe the four scanner windows with a dry, lint-free cloth.
* This movie is being streamed from YouTube. (Opening new window.)
To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration
Make sure the green lock lever is in the release position. Match the guide ends of the drum unit to the marks on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever. Turn the green lock lever clockwise to the lock position. Push the drum unit in until it stops, and then close the front cover of the machine.
* This movie is being streamed from YouTube. (Opening new window.)
Plug the machine's power cord back into the AC power outlet first, connect all cables, and then plug in the telephone line cord (if applicable). Turn on the machine's power switch.
* This movie is being streamed from YouTube. (Opening new window.)
Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?
marks on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever. Turn the green lock lever clockwise to the lock position. Push the drum unit in until it stops, and then close the front cover of the machine.
