DCP-L1628
FAQs & Troubleshooting |
No Paper T1
The No Paper T1 message appears when the machine is out of paper, or paper is not loaded correctly in the paper tray.
Check the following points to clear the No Paper T1 message.
-
Refill paper in the paper tray.
Make sure the paper guides are set to the correct size, and then press Start.
-
If there is paper in the tray, remove it and load it again.
Make sure the paper guides are set to the correct size, and then press Start.
- Do not overfill the paper tray.
Content Feedback
To help us improve our support, please provide your feedback below.