DC100

FAQ et Diagnostic

How to check the wireless status or network configuration on my machine

You can check the wireless status or network configuration in the network settings.

Initializes the wireless network settings. For details on specifying the settings, see How to reset the network settings to the factory settings?

Press

to display the 5.Others, and then press

.

Displays the following parameters for other wireless network settings.

1. TCP/IP	TCP/IP settings can be manually entered.
2. MAC Address	Displays the MAC address.
3. SSID	Displays the network SSID when a wireless network connection is established.
4. Network Reset 4. Network Reset:	Resets all network settings to their defaults.

When the Wireless LAN Connect light on the machine's operation panel lights up, the machine is connected to a wireless network.

(1) Wireless LAN Connect light

Start up DesignNCut Manager (application for selecting cut settings) on the computer.
From the DesignNCut menu, click Settings.
You can see the network configuration or the status of wireless network in the network settings.

	(1)	Select whether or not the machine will connect to the wireless network.
	(2)	Displays the connection status.
	(3)	Displays the machine’s signal strength as one of four levels. The signal strength is indicated by a number. 0 : No connected (*When the USB cable connected) 1 : Weak signal 2 : Medium signal 3 : Strong signal
	(4)	Displays the SSID of the wireless router that the machine is connected to.
	(5)	If Static is selected, TCP/IP settings can be manually entered.


	(6)	Use when proxy settings are required.
	(7)	Displays the MAC address.

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.