HL-4070CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

"JAM REAR" error appears on the LCD. What should I do?

If a paper jam occurs behind the face-up output tray, follow these steps:

 

After you have just used the printer, some internal parts of the printer will be extremely hot. When you open the front cover or back cover of the printer, DO NOT touch the shaded parts shown in the illustrations.

  1. Open the back cover.
  2. Pull the tabs at the left and right hand sides toward you and fold down the fuser cover (1).
  3. Using both hands, gently pull the jammed paper out of the fuser unit.

    After you have just used the printer, some internal parts of the printer will be extremely hot. Wait for the printer to cool down before you touch the internal parts of the printer.

  4. Close the fuser cover (1) and lift the tabs at the left and right hand sides.
  5. Fully close the back covers.

     

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4040CDN, HL-4040CN, HL-4050CDN, HL-4070CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.