QL-700

FAQs & Troubleshooting

FAQs & Troubleshooting

How can I print data directly from Access 2010?

In this FAQ, we take a database created in Access 2010 as an example, and introduce how to print the data in the field "Number" on to a 36mm tape using the PT-9800PCN, while specifying the label size of 12 mm x 36 mm and the printing size of 10 mm x 26 mm.

 

sample image

 

  1. Click the [Create] tab and click the [Labels] button to open the "Label Wizard" dialog box.
    Image
     
  2. In the "Label Wizard" dialog box, click the [Customize…] button. Here you can create a custom label specifying the label type and the printing size.
    Image
     
  3. The "New Label Size Wizard" dialog box appears. In the "New Label Size" dialog box, select the "Continuous" radio button in the "Label Type" field, and then click the [New...] button to open the "Edit Label" dialog box.
    Image
     
  4. In the "Edit Label" dialog box, enter the print size, and then click the [OK] button.
    (e.g. Height: 1.00 cm; Width: 2.60 cm; Side Margin: 0.50 cm)
    Image
     
  5. In the "New Label Size" dialog box, click the [Close] button.
     
  6. In the "Label Wizard" dialog box, make sure that the label you defined in step 4 is selected in the label type list, and then click the [Next] button.
    Image
     
  7. You can change the text appearance if necessary and then click the [Next] button.
    Image
     
  8. Add the {Number} in the Prototype label field and click the [Next] button.
    Image
     
  9. Click the [Next] button.
    Image
     
  10. Select "Modify the label design" and click the [Finish] button.
    Image
     
  11. The label report (here named as "Labels Number") is created. If you prefer you can change the layout design and then open the "Page Setup" ribbon by clicking the [Page Setup] tab. Click the [Page Setup] button.
    Image
     
  12. In the "Page Setup" dialog box, click the [Page] tab and select "Use Specific Printer", and then click the [Printer...] button.
    Image
     
  13. In the "Page Setup" dialog box, select your printer model and click the [Properties] button. (e.g. "Brother PT-9800PCN")
    Image
     
  14. In the Brother Printer Properties dialog box, select your tape width in the "Paper Size" list and specify the label length and feed size. Then, click the [OK] button.
    (e.g. Tape Width: [36 mm]; Length: 12.0 mm; Feed: 1.0 mm)
    Image
     
  15. Click the [OK] button in the "Page Setup" dialog box.
     
  16. Click the [Print Options] tab in the "Page Setup" dialog box and specify the appropriate margins between the label size you specified in step 14 and the print size you specified in step 4.
    (e.g. Top Margin: 1 mm; Bottom Margin: 1 mm; Left Margin: 5 mm; Right Margin: 5 mm)
    Then click the [OK] button.
    Image
     
  17. Click the "File" tab, then click the "Print" tab. Click [Print] to open the "Print" dialog box.
    Image
     
  18. Enter the "Print Range" if necessary and click the [OK] button.
    Image
     
  19. The label will start to print.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-2430PC, PT-9500PC, PT-9700PC, PT-9800PCN, QL-700, QL-710W, QL-720NW, QL-800, QL-810W/810Wc, QL-820NWB/820NWBc

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.