PJ-723

FAQs & Troubleshooting

FAQs & Troubleshooting

How to connect to a DC power outlet (optional)

Connect the printer to your vehicle’s 12 V DC power outlet (cigarette lighter or similar) to power the printer or charge the rechargeable Li-ion battery using the vehicle’s DC power.

  1. Connect the car adapter to the vehicle’s 12 V DC power outlet.
  2. Connect the car adapter to the printer.

 

Car adapter 1 Car adapter


 

 

  • The car adapter is an optional accessory.
  • The voltage supplied by a vehicle may fluctuate, and printing speed may vary.
  • The maximum voltage is 12 V DC.
  • The car adapter plug is not compatible with other outlets that are not the 12 V cigarette type.
  • When the car adapter is connected to charge the rechargeable Li-ion battery, the amount of voltage required to fully charge the battery may not be supplied by the DC power socket.
    If 9 hours have passed since charging started, the STATUS indicator turns off and charging stops even if the rechargeable Li-ion battery has not been fully charged.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.