SDX125i

FAQs & Troubleshooting

What thickness of material can be cut with the cutting machine?

Paper with a thickness of 0.1 to 1.0 mm, fabric of 0.25 to 1.0 mm, and felt or a foam sheet (urethane foam) of 3.0 mm can be cut. These thickness values are approximate guidelines.

The cutting machine may not be able to cut depending on the material or hardness of the material. Before cutting the material, always perform a test/trial cut to confirm successful cutting. For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
For the mat and blade appropriate for the material, refer to Mat, Cutting Blade and Material Combinations.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

SDX125, SDX125e, SDX125i, SDX225, SDX325, SDX85

Content Feedback

To help us improve our support, please provide your feedback below.

FAQs & Troubleshooting

What thickness of material can be cut with the cutting machine?

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Content Feedback

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Support & Downloads

SDX125i

Canada(English)