Prepare firmware upgrade, then press [OK] button. message appears.

Possible causes


The machine was turned off while the machine was updating the software. 
Wireless network connection is disconnected while the machine was updating the software.

 

 

Solutions


Download the update file from this site, and update the machineʼs software with a USB cable.

 

 

  1. Make sure that the machine is turned on.


     
  2. Download the update file from "Downloads" page on this site. Click here to go to “Downloads” page.


     
  3. Make sure that Prepare firmware upgrade, then press [OK] button. message is displayed on the machine's LCD.


     
  4. Plug the USB cable connector into the corresponding USB ports for the computer and for the machine.
     
    image

    (1) USB port for a computer

    (2) USB cable



     
  5. Open the "This PC" folder on the computer, and then select "Removable Disk".
    The drive name may differ depending on the OS version.

    image


     
  6. Copy the update file to "Removable Disk", and then pressimagebutton on the operation panel.
    The software update will be started.
    Writing upgrade file. message appears while the software is updating.

    image
     

    Do not turn off the machine while it is being updated.


     
  7. When the following message appears on the machine, turn the machine off, then on again.

    The update is finished. Turn the machine off, then on again.


     

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DC200, DC200ULE

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.