Follow the instructions below to connect the machine and computer using wireless LAN.
 

Installing DesignNCut Manager on your computer 
Setting the wireless connection using WLAN Assistant Wizard

Installing DesignNCut Manager on your computer

1. Logon to your computer as an administrator.
   
   
    
2. Install DesignNCut Manager on the computer.
   - If you installed the DesignNCut Manager, startup the DesignNCut Manager and go to Setting the wireless connection using WLAN Assistant Wizard.
   - If not, go to step 3.
   
    
3. Click here to download the DesignNCut Manager.
   
    
4. Select your Operating System and version, and then click [Search] .
   
   
   
    
5. Select DesignNCut Manager.
   
   
   
   
    
6. Read the License Agreement, and then click Agree to the EULA and Download.
   
   
    
7. Download the software to the local folder on your computer and install.
   For Macintosh users, drag the App icon image to the “Applications” folder.
   Startup the DesignNCut Manager and go to Setting the wireless connection using WLAN Assistant Wizard
   
   
    
8. When the following screen appears, select language for the installation and click [OK] .
   
   
   
   
    
9. When the following screen appears, click [Next] to continue.
   
   
   
    
10. When the following screen appears, click [Install] to continue.
    
    
    
    
     
11. When the following screen appears, the DesignNCut Manager has been installed on your computer.
    Click [Finish] .
    
    
    
    
     
12. When the Welcome To DesignNCut Manager appears on your screen follow the on-screen instructions.
    
    
     

Setting the wireless connection using WLAN Assistant Wizard

1. Click [Start Setup] on the guidance screen.
   
   
    
    
2. Click [Connect] .
   
   
   
    
3. Select Wireless LAN, and then click [Next] .
   
   
   
    
4. Select Use WLAN Assistant Wizard, and then click [Next] .
   
   
    
5. Turn off the DesignNCut machine, by pressing .
   
   
   
    

6. Press  and the on the operation panel at the same time, once the power comes on releasewhile still pressing down.
   
   
    

7. When the message Machine mode? appears on the machine’s LCD, press  to select WLAN.
   
   
    

8. When the message Turn the machine off, then on again. appears, turn the machine off, then on again.
   Once your machine is back on, the message Standby (WLAN) appears.
   
    

9. Press   to go to 1.Network, and then press.
   
   
   
   
    

10. Press to go to 3.WAW, and then press .
    
     

11. When the message Enable WLAN? appears on the machine’s LCD, press to select Yes.
    
     

12. When the message WAW connection? appears on the machine’s LCD, press to select Yes.
    
    
     

13. Go back to DesignNCutManager, and then click Wizard.
    
    
    
    
     

14. When the About firewalls screen appears, select Change the firewall setting to enable communication with the DesignNCut machine and continue with the WAW (WLAN Assistant Wizard) (Recommended), and then click [Next] .
    
    
    
    
     
15. Confirm the message on the screen.
    Check the Confirmed box, and then click [Next] .
    
    
    
    
    
     
16. Your wireless network name (SSID) will be displayed.
    Confirm the network name, and then click [Next] .
    
    
    
    
     
17. Give your machine time to connect to your wireless network.
    
    
    
    
     

18. When the message Connected to WLAN. Press [OK] button. appears on the machine’s LCD, presson your machine.
    
    
     

19. The Wireless LAN Connect light will turn on.
    Give the Wireless LAN Connect light time to turn on.

    (1) Wireless LAN Connect light

    
    
     

20. When the Wireless LAN Connect light turns on, click [OK] .
    
    
    
     
     

21. Select the machine number and then click [OK] .
    
    Depending on the settings of the wireless LAN access point/router, the machine name may not be displayed correctly. In that case, select the number or letter that is listed in the screen, and click [OK] .
    
    
     

    To check your machine's number, press to display the 2. Machine Info on the machine’s LCD, and then press. When 1. No. appears on the LCD, press. 
    Your machine’s number will be displayed on the machine’s LCD.

     

    
     

22. When DesignNCut Connection is successful. appears in the dialog box, click [OK] .
    
    
    
     

23. Create a CanvasWorkspace (Web) account.
    - If you created an account, click [Next] and continue to step 24.
    - If no, click CanvasWorkspace (Web) on the following screen to access to <https://canvasworkspace.brother.com> to register a new account.
      After registering, click [Next] and go to step 24.
    
    
     

    • If you have a CanvasWorkspace (Web) account for your ScanNCut we recommend creating a new account for DesignNCut.
    • CanvasWorkspace (Web) is our easy to use free cloud-based editing software. CanvasWorkspace (Web) allows you to edit and create files at your convenience. It has hundreds of Free Projects & Cut files with step by-step instructions and how-to videos. CanvasWorkspace (Web) also allows you to upload SVG, DXF  (AutoCAD files) & FCM files to use as your cut files. CanvasWorkspace (Web) is also used for cut data mat positioning.

    
    
     

24. Click [Connect] .
    
    
    
    
     

25. Register dialog box will appear.
    Type in the login ID and password registered with CanvasWorkspace (Web) , and then click [Register] .
    
    
    
     
     

26. When the ScanNCut Online Settings has been completed. dialog box appears, click [OK] .
    
    
    
     

27. Click [Next] .
    
    
    
    
    Once you completed the connection and CanvasWorkspace (Web) registration you can create a pattern on CanvasWorkspace (Web) <https://canvasworkspace.brother.com> and cut the data with DesignNCut by operating DesignNCut Manager.
    Refer to How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection?
    
    
    Click [How to Use] on the DesignNCut Manager to see tutorial for the basic usage.
    
    
     

    After the settings have been completed, your machine number and your CanvasWorkspace (Web) login ID will be shown in the DesignNCut Manager’s main window.