DC200ULE

FAQs & Troubleshooting

FAQs & Troubleshooting

How to set up the wireless connection using WLAN Assistant Wizard. (Computer Instructions)

Follow the instructions below to connect the machine and computer using wireless LAN.
 

image
 


Installing DesignNCut Manager on your computer 
Setting the wireless connection using WLAN Assistant Wizard

 

 



Installing DesignNCut Manager on your computer

 

  1. Logon to your computer as an administrator.


     
  2. Install DesignNCut Manager on the computer.
    - If you installed the DesignNCut Manager, startup the DesignNCut Manager and go to Setting the wireless connection using WLAN Assistant Wizard.
    - If not, go to step 3.

     
  3. Click here to download the DesignNCut Manager.

     
  4. Select your Operating System and version, and then click [Search] .

    image

     
  5. Select DesignNCut Manager.

    image


     
  6. Read the License Agreement, and then click Agree to the EULA and Download.


     
  7. Download the software to the local folder on your computer and install.
    For Macintosh users, drag the App icon image to the “Applications” folder.
    Startup the DesignNCut Manager and go to Setting the wireless connection using WLAN Assistant Wizard


     
  8. When the following screen appears, select language for the installation and click [OK] .

    image


     
  9. When the following screen appears, click [Next] to continue.
    image


     
  10. When the following screen appears, click [Install] to continue.

    image


     
  11. When the following screen appears, the DesignNCut Manager has been installed on your computer.
    Click [Finish] .

    image


     
  12. When the Welcome To DesignNCut Manager appears on your screen follow the on-screen instructions.

    image
     


 

Setting the wireless connection using WLAN Assistant Wizard

 

  1. Click [Start Setup] on the guidance screen.

    image
     
     
  2. Click [Connect] .

    image

     
  3. Select Wireless LAN, and then click [Next] .

    image

     
  4. Select Use WLAN Assistant Wizard, and then click [Next] .
    image

     
  5. Turn off the DesignNCut machine, by pressing image.
    image


     
  6. Press image and theimage on the operation panel at the same time, once the power comes on releaseimagewhile still pressing downimage.
    image

     

  7. When the message Machine mode? appears on the machine’s LCD, press image to select WLAN.


     

  8. When the message Turn the machine off, then on again. appears, turn the machine off, then on again.
    Once your machine is back on, the message Standby (WLAN) appears.

     

  9. Press image  to go to 1.Network, and then pressimage.

    image


     

  10. Pressimage to go to 3.WAW, and then press image.

     

  11. When the message Enable WLAN? appears on the machine’s LCD, pressimage to select Yes.

     

  12. When the message WAW connection? appears on the machine’s LCD, pressimage to select Yes.


     

  13. Go back to DesignNCutManager, and then click Wizard.

    image


     

  14. When the About firewalls screen appears, select Change the firewall setting to enable communication with the DesignNCut machine and continue with the WAW (WLAN Assistant Wizard) (Recommended), and then click [Next] .

    image


     
  15. Confirm the message on the screen.
    Check the Confirmed box, and then click [Next] .

    image



     
  16. Your wireless network name (SSID) will be displayed.
    Confirm the network name, and then click [Next] .


    image

     
  17. Give your machine time to connect to your wireless network.

    image


     
  18. When the message Connected to WLAN. Press [OK] button. appears on the machine’s LCD, pressimageon your machine.


     

  19. The Wireless LAN Connect light will turn on.
    Give the Wireless LAN Connect light time to turn on.

    image  (1) Wireless LAN Connect light



     

  20. When the Wireless LAN Connect light turns on, click [OK] .

    image

     
     

  21. Select the machine number and then click [OK] .

    Depending on the settings of the wireless LAN access point/router, the machine name may not be displayed correctly. In that case, select the number or letter that is listed in the screen, and click [OK] .

    image
     

    To check your machine's number, pressimage to display the 2. Machine Info on the machine’s LCD, and then pressimage. When 1. No. appears on the LCD, pressimage
    Your machine’s number will be displayed on the machine’s LCD.

     


     

  22. When DesignNCut Connection is successful. appears in the dialog box, click [OK] .

    image

     

  23. Create a CanvasWorkspace (Web) account.
    - If you created an account, click [Next] and continue to step 24.
    - If no, click CanvasWorkspace (Web) on the following screen to access to <https://canvasworkspace.brother.com> to register a new account.
      After registering, click [Next] and go to step 24.

    image
     

    • If you have a CanvasWorkspace (Web) account for your ScanNCut we recommend creating a new account for DesignNCut.
    • CanvasWorkspace (Web) is our easy to use free cloud-based editing software. CanvasWorkspace (Web) allows you to edit and create files at your convenience. It has hundreds of Free Projects & Cut files with step by-step instructions and how-to videos. CanvasWorkspace (Web) also allows you to upload SVG, DXF  (AutoCAD files) & FCM files to use as your cut files. CanvasWorkspace (Web) is also used for cut data mat positioning.



     

  24. Click [Connect] .

    image


     

  25. Register dialog box will appear.
    Type in the login ID and password registered with CanvasWorkspace (Web) , and then click [Register] .

    image

     
     

  26. When the ScanNCut Online Settings has been completed. dialog box appears, click [OK] .

    image

     

  27. Click [Next] .

    image


    Once you completed the connection and CanvasWorkspace (Web) registration you can create a pattern on CanvasWorkspace (Web) <https://canvasworkspace.brother.com> and cut the data with DesignNCut by operating DesignNCut Manager.
    Refer to How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection?


    Click [How to Use] on the DesignNCut Manager to see tutorial for the basic usage.

    image
     

    After the settings have been completed, your machine number and your CanvasWorkspace (Web) login ID will be shown in the DesignNCut Manager’s main window.
    image

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DC200, DC200ULE

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.