DC200
FAQs & Troubleshooting |
How do I Register The Machine With CanvasWorkspace (Web)? (Wireless Network Connection Only)
Register the machine with CanvasWorkspace (Web) to send the pattern to the machine.
After the machine is registered with CanvasWorkspace (Web) <https://canvasworkspace.brother.com>, various editing operations can be performed and data can be transferred.
- A computer or mobile device that can run CanvasWorkspace (Web) and connect to the network is required.
-
Connected DesignNCut machine to CanvasWorkspace (Web), DesignNCut Manager and wireless connection is required.
If you haven't set up your wireless connection, please refer to your Connection Guide. - To use this function the machine and the computer must be on the same network that is connected to the internet.
- If the machine and computer is connected with a USB cable, you cannot register the CanvasWorkspace (Web) on DesignNCut Manager. For details on how to transfer the pattern from the computer to the machine with a USB cable, see How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable? (Windows only)
-
Start up DesignNCut Manager (application for selecting cut settings) .
-
Click CanvasWorkspace (Web) in the main window of DesignNCut Manager.
-
Type in the login ID and password registered with CanvasWorkspace (Web) , and then click [Register] .
-
First-time users must create a CanvasWorkspace (Web) account.
To create an account, visit CanvasWorkspace (Web) at <https://canvasworkspace.brother.com> - Only one serial number can be registered with one login ID for CanvasWorkspace. To register a different cutting machine with CanvasWorkspace, register a new account with the new machine. In that case, the registration for the first machine will be deleted.
-
First-time users must create a CanvasWorkspace (Web) account.
If you want to change or delete the registered CanvasWorkspace (Web) Login ID, refer to How do I Change or Delete a Registered CanvasWorkspace Login ID?
Content Feedback
To help us improve our support, please provide your feedback below.