DC200ULE
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
The material to be cut/drawn peels off during cutting/drawing.
Possible Causes (or Results)
-
The mat’s adhesive strength has decreased, or the material is not secured.
-
The material extends from the adhesive area of the mat.
Solutions
-
Press the “Pause/Stop” button to stop the operation.
-
Follow the instructions on the screen, and press the “Feed” button
to feed out the mat.
![image image](/g/b/img/faqend/faqh00100654_000/ca/en/1455023/faqh693_fig00001.gif)
If the mat does not feed out, turn off the machine (A), remove the holder (B), and then manually feed out the mat (C).
![image image](/g/b/img/faqend/faqh00100654_000/ca/en/1455026/faqh697_fig00001.gif)
-
After feeding out the mat, replace it with a new one or attach the material while keeping it within the adhesive area of the mat.
![image image](/g/b/img/faqend/faqh00100654_000/ca/en/1455025/faqh690_fig00002.gif)
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DC200, DC200ULE
Content Feedback
To help us improve our support, please provide your feedback below.