Innov-is XV8550D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 08/27/2014
  • ID: faqh00100074_000

Spool Stand LED

This machine is equipped with a spool stand LED. Its lighting status and color indicate the machine status and thread color for embroidering.

Use the color in which the LED lights up as a guide. Since the actual embroidery thread color may differ slightly, be sure to also check the thread color number in the LCD.

img

 (1) Spool stand LED
Lit Lights up in thread color for embroidering
Lit (color changing) Indicates thread spool replacement (then lights up in embroidery thread color)
Flashing (red) Error
Flashing (green) End of stitching
  • When embroidering a pattern with uninterrupted embroidering, the LED lights up in gray.
  • When embroidering an appliqué pattern, the LED light indicates no color while embroidering “ imgAPPLIQUE MATERIAL”, “ img APPLIQUE POSITION” or “ img APPLIQUE”.

When Not Using the Spool Stand LED

  1. Press img.
     
  2. Press img.
    The General settings screen appears.
     
  3. Display page 5 of the Embroidery settings screen.
     
  4. Set “Spool Stand LED” to “OFF”.

    img
     
  5. Press " OK " to return to the original screen.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is XV8500D, Innov-is XV8550D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit