Innov-is NS2750D

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I save the embroidery patterns in the machine’s memory?

You can save embroidery patterns that you have customized and will use often; for example, your name, patterns that have been rotated or had the size changed, patterns that have had the sewing position changed, etc.
A total of about 1 MB of patterns can be saved in the machine's memory.

 

 

  1. Press image  when the pattern you want to save is in the pattern editing screen or embroidery settings screen.

     


     


     

  2. Press image.

    The "Saving..." screen is displayed. When the pattern is saved, the display returns to the original screen automatically.

    Press image to return to the original screen without saving.

 

If the memory is full

If the screen below displays, either the maximum number of patterns have been saved or the pattern you want to save takes a lot of memory, and the machine cannot save it. If you delete a previously saved pattern, you can save the current pattern.

 

 

  1. Press "OK".

     

    The machine displays the patterns currently saved.
     

    Press "Cancel" to return to the original screen without saving.

     

     

  2. Select the pattern you want to delete.

    Pressimage / image to move to the previous/next page.

     

  3. Press "Delete".

    (1) Amount of memory used by the pattern to be deleted

    (2) Amount of machine’s memory

     

  4. Press "OK".


     

    The “Saving...” screen displays. When the pattern is saved, the display returns to the original screen automatically.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is NS1150E, Innov-is NS2750D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.