By plugging in the connector on the back of your machine, the embroidering needle drop point will be indicated on the fabric, allowing you to accurately position the pattern.

1. Press the “Needle Position” button to raise the needle.
   
   
   
2. Press  .
   
   

   The entire screen becomes white, and all keys and operation buttons are locked.

   
   
3. Raise the presser foot lever.
   
   
   
   
   
4. Push the black button on the presser foot holder and remove the presser foot.
   
   
   
   (1) Black button (2) Presser foot holder
   
   
5. Use the included screwdriver to loosen the screw of the presser foot holder, then remove the presser foot holder.
   
   
   
   (1) Screwdriver (2) Presser foot holder (3) Presser foot holder screw
   
   
6. Position the embroidery foot “W+” with LED pointer or “W” on the presser foot bar by aligning the notch of the embroidery foot to the large screw.
   
   Side view
   
   
   
   
   
7. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw.
   
   
   
   

   Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury.

   → For users of embroidery foot “W”, skip step8 and go to step9.
   
   
   
8. Plug the connector of the embroidery foot “W+” with LED pointer into the jack on the back of your machine.
   
   
   
   
9. Press  to unlock all keys and buttons.
   
   

   All keys and operation buttons are unlocked, and the previous screen is displayed.