JX1710

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 12/12/2018
  • ID: faqh00000007_000

Upper threading (Point)

+ Before upper threading, be sure to raise a presser foot (Refer to Fig.A below.) and raise a needle to its highest position.

 

+ To pass a thread through thread take-up lever and tension discs surely, be sure to guide the thread by your left hand while holding the thread lightly with your right hand. (Refer to Fig.B below)

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BM2800, BM3730, CE1000, CE-5000/5000PRW, CE5500T, CE6070T, CE8080/CE8080PRW, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, ES-2000/2000T, EX-660, H537ST, HC3010, HC7140, HE-240, HE300, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 4750D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BQ2450, Innov-is BQ2500, Innov-is BQ3050, Innov-is BQ3100, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is VQ2400, Innov-is VQ3000, JX1400, JX1410, JX1710, JX2217, LB6810, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS-30, LS-590, LX-3125/3125E, LX3850, PE-150V, PE-180D, PE-700II/750D(USB), PE-780D, PS-21, PS-3100/3700, QC-1000, SC9500, SE-350, SQ9050, SQ9130, ST371HD, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL-3750, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700, XL-6452, XL-6562, XM3710, XR37T, XR6060, XR-65T, XR-7700, XS6060

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit