MFC-J6545DW(XL)

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 11/20/2018
  • ID: faq00100222_515

Create a Self-signed Certificate

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      • For example:

        https://SharedPrinter

      If you enable a NetBIOS name, you can also use the node name.

      • For example:

        https://brnxxxxxxxxxxxx

      The NetBIOS name can be found in the Network Configuration Report.

    • For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
  3. If the machine prompts you for a password, type it, and then click .
  4. Click the Network tab.
  5. Click the Security tab.
  6. Click the Certificate menu in the left navigation bar.
  7. Click Create Self-Signed Certificate.
  8. Enter a Common Name and a Valid Date.
    • The length of the Common Name is less than 64 bytes. Enter an identifier, such as an IP address, node name, or domain name to use when accessing this machine through SSL/TLS communication. The node name is displayed by default.
    • A warning will appear if you use the IPPS or HTTPS protocol and enter a different name in the URL than the Common Name that was used for the self-signed certificate.
  9. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit).
  10. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256.
  11. Click Submit.
  12. Click the Network tab.
  13. Click the Protocol menu in the left navigation bar.
  14. Click HTTP Server Settings.
  15. Select the certificate you want to configure from the Select the Certificate drop-down list.
  16. Click Submit.
  17. Click Yes to restart your print server.
The self-signed certificate is created and saved in your machine's memory.

To use SSL/TLS communication, the self-signed certificate must be installed on your computer.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J6545DW(XL), MFC-J6945DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit