MFC-7240

FAQs & Troubleshooting

FAQs & Troubleshooting

Change the quality of the faxes I send (Fax Resolution).

You can change the quality of your sent faxes by adjusting the Fax Resolution setting.

You can choose the following Fax Resolution settings:


Standard Suitable for most typed documents.
Fine Good for small print and transmits a little slower than Standard resolution.
S.Fine Good for small print or artwork and transmits slower than Fine resolution.
Photo Use when the document has varying shades of gray or is a photograph.
This has the slowest transmission time.

Please follow the steps applicable for your case.


Case A: Changing Fax Resolution for the next fax only:

To change the Fax Resolution setting for the next fax you send, follow these steps:

  1. Press the FAX key to illuminate it.

  2. Load your document(s).

  3. Press Resolution.

  4. Press the Up or Down arrow key to choose the Fax Resolution setting you want to use.

    You can select Standard, Fine, S. Fine, or Photo.

  5. Press OK.

  6. Enter the fax number you want to send to.

  7. Press Start.

Case B: Changing the default Fax Resolution:

To change the machine's default Fax Resolution setting, follow these steps:

  1. Press the FAX key to illuminate it.

  2. Press Menu

  3. Press the Up or Down arrow key to choose Fax and press OK.

  4. Press the Up or Down arrow key to choose Setup Send and press OK.

  5. Press the Up or Down arrow key to choose Fax Resolution and press OK.

  6. Press the Up or Down arrow key to choose the default Fax Resolution setting that you want to use.

    You can choose Standard, Fine, S. Fine, or Photo.

  7. Press OK.

  8. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FAX-2840, MFC-7240

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.