MFC-8510DN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I adjust my Brother machine's tray use for copying, faxing, and printing?

Changing the default tray use in Copy Mode

You can change the default tray your Brother machine uses for printing copies by following these steps:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

 

  1. Press Menu and choose General Setup => Tray Use => Copy.
     
  2. Press the Up or Down arrow key to choose a setting.

     

    • You can choose Tray #1 Only, Tray #2 Only, MP Only, MP>T1>T2, or T1>T2>MP.
       
    • If you choose Tray #1 Only, Tray #2 Only, or MP Only, your Brother machine will only pull paper from that tray. If the selected tray runs out of paper, "No Paper" will appear on the Brother machine's LCD. You must load paper in the empty tray.
       
    • Tray #2 Only and T2 Only appear if you have installed the optional second paper tray.
      (The optional tray is not available for some models.)
  3. Press OK.
     
  4. Press Stop/Exit.
     

<For touchscreen models>

  1. Press Menu.
     
  2. Press the Up or Down arrow key to display General Setup. Press General Setup.
     
  3. Press the Up or Down arrow key to display Tray Setting. Press Tray Setting.
     
  4. Press the Up or Down arrow key to display Tray Use:Copy. Press Tray Use:Copy.
     
  5. Press Tray#1 Only, Tray#2 Only1, MP Only, MP>T1>T21 or T1>T21>MP.
     
  6. Press Stop/Exit.
    1 The Tray#2 Only and T2 appear only if Tray 2 is installed.
  • When you load documents in the Brother machine's Automatic Document Feeder (ADF) with MP>T1>T2 or T1>T2>MP selected, the machine looks for the tray with the most suitable paper and pulls paper from that tray. If no tray has suitable paper, the machine pulls paper from the tray with higher priority in the selected setting.
     
  • When you make copies on the Brother machine's flat scanner glass, your document is copied from the higher-priority tray, even if there is more suitable paper in another tray.

 

Changing the default tray use in Fax Mode

You can change the default tray your Brother machine uses for printing faxes by following these steps:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

 

  1. Press Menu and choose General Setup => Tray Use => Fax.
     
  2. Press the Up or Down arrow key to choose a setting.

     

    • You can choose Tray #1 Only, Tray #2 Only, MP Only, MP>T1>T2, or T1>T2>MP.
       
    • If you choose Tray #1 Only, Tray #2 Only, or MP Only, your Brother machine will only pull paper from that tray. If the selected tray runs out of paper, "No Paper" will appear on the Brother machine's LCD. You must load paper in the empty tray.
       
    • Tray #2 Only and T2 only appear if you have installed the optional second paper tray.
      (The optional tray is not available for some models.)
  3. Press OK.
     
  4. Press Stop/Exit.

 

<For touchscreen models>

  1. Press Menu.
     
  2. Press the Up or Down arrow key to display General Setup. Press General Setup.
     
  3. Press the Up or Down arrow key to display Tray Setting. Press Tray Setting.
     
  4. Press the Up or Down arrow key to display Tray Use:Fax. Press Tray Use:Fax.
     
  5. Press Tray#1 Only, Tray#2 Only1, MP Only, MP>T1>T21 or T1>T21>MP.
     
  6. Press Stop/Exit.
    1 The Tray#2 Only and T2 appear only if Tray 2 is installed.
  • You can use four paper sizes for printing faxes: A4, Letter, Legal, or Folio. When paper of a suitable size is not in any of the paper trays, your Brother machine will store received faxes in memory and the "Size Mismatch" error will appear on its LCD.
     
  • If the tray is out of paper and there are received faxes in the Brother machine's memory, the "No Paper" error will appear on its LCD. You must load paper in the empty tray.

 

Changing the default tray use in Print Mode

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

 

  1. Press Menu and choose General Setup => Tray Use => Print.
     
  2. Press the Up or Down arrow key to choose a setting.

     

    • You can choose Tray #1 Only, Tray #2 Only, MP Only, MP>T1>T2, or T1>T2>MP.
       
    • If you choose Tray #1 Only, Tray #2 Only, or MP Only, your Brother machine will only pull paper from that tray. If the selected tray runs out of paper, "No Paper" will appear on the Brother machine's LCD. You load paper in the empty tray.
       
    • Tray #2 Only and T2 only appear if you have installed the optional second paper tray.
      (The optional tray is not available for some models.)
  3. Press OK.
     
  4. Press Stop/Exit.

 

<For touchscreen models>

  1. Press Menu.
     
  2. Press the Up or Down arrow key to display General Setup. Press General Setup.
     
  3. Press the Up or Down arrow key to display Tray Setting. Press Tray Setting.
     
  4. Press the Up or Down arrow key to display Tray Use:Print. Press Tray Use:Print.
     
  5. Press Tray#1 Only, Tray#2 Only1, MP Only, MP>T1>T21 or T1>T21>MP.
     
  6. Press Stop/Exit.
    1 The Tray#2 Only and T2 appear only if Tray 2 is installed.
  • The setting in the printer driver will take priority over the setting made on the Brother machine's control panel.
     
  • If the setting on the Brother machine's control panel is Tray #1 Only, Tray #2 Only, or MP Only and you choose Auto Select in the printer driver, the machine will pull paper from the tray you designated on the control panel.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-8480DN, MFC-8510DN, MFC-8890DW, MFC-8910DW, MFC-8950DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.