HL-4570CDW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 09/06/2010
  • ID: faq00002707_000

Offset image

Offset image


Please check the following points to solve the problem:

NOTE: The illustration shown below is from a representative product, and may differ from your Brother machine.

  1. Check the machine's environment. Conditions such as high humidity and high temperatures may cause this print quality problem.

  2. Check that you use the paper that meets our specifications. Click here to see the details of the recommended paper.

  3. Make sure that the media type setting in the driver matches the type of paper you are using.

  4. Make sure that the two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.
    gray levers in the up position


  5. The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.

  6. The drum unit may be damaged. Put in a new drum unit. Click here to see the details of how to replace the drum unit.

 

Click here to view other examples of print quality issues.



If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4150CDN, HL-4570CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit