MFC-J4310DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 06/12/2015
  • ID: faq00002588_001

Verify if the Brother machine has a dial tone.

To verify your Brother machine has a dial tone, follow the steps below:

  1. Plug the telephone line cord into your Brother machine (labeled "LINE" for some countries), and then plug the other end directly into the wall telephone jack (socket).
  2. Check for a dial tone.

     

    1. Press image(Fax).
                 
    2. Check your Brother machine has Hook or Tel or Tel(R).

       

      • If your Brother machine has Hook, press it, and listen for a dial tone. Verify the speaker volume is turned up.
      • If your Brother machine has Tel or Tel(R), you can check for a dial tone by connecting an external phone to the jack (socket) labeld EXT.

     

     

    Or, follow the steps below:

     

    1. Check that the speaker volume is set to LOW, NORMAL (Med) or HIGH (not OFF).
            
    2. Press image(Fax).
          
    3. Press any key on the dial pad.
            
    4. Press Fax Start. The machine scans from the flatbed.
           
    5. When the message Next Page Yes/No is displayed, press NO.
            
    6. Listen for a dial tone when the machine starts to dial.

If you do not hear a dial tone, click here to see points to be checked when your Brother machine has no dial tone.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-9130CW, MFC-9330CDW, MFC-9340CDW, MFC-J285DW, MFC-J4310DW, MFC-J4410DW, MFC-J4610DW, MFC-J650DW, MFC-J680DW, MFC-J690DW, MFC-L2720DW, MFC-L2730DW, MFC-L2740DW, MFC-L2750DW(XL), MFC-L2759DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit