MFC-7860DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 02/04/2011
  • ID: faq00002411_011

Cover is Open

Check the solution applicable for your case.

NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

 

Case 1: The front cover is not completely closed.
Close the front cover of the machine.

front cover

  • If your brother machine doesn't have an Automatic Document Feeder (ADF), go to Case 4.
  • If your Brother machine has an ADF, go to Case 2.

Case 2: The ADF cover is not completely closed.
Make sure that the ADF cover of your machine is completely closed.

ADF cover

Case 3: The ADF is open while loading a document.
Close the ADF cover of the machine, then press Stop/Exit.

 

Case 4: The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power. 
Make sure paper is not jammed inside the back of the machine, and then close the fuser cover (1) and press Start.

Fuser cover





 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7060D, DCP-7065DN, HL-2280DW, MFC-7360N, MFC-7460DN, MFC-7860DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit