HL-3140CW
 |
FAQs & Troubleshooting |
Toner Low
When the LCD shows Toner Low: X, the machine has nearly run out of toner. X shows the toner color that is near the end of its life. (BK=Black, C=Cyan, M=Magenta, Y=Yellow). Buy a new toner cartridge and have it ready before you get a Replace Toner message.
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the Toner Cartridge and not the drum unit. Click here to see information for the difference between the toner cartridge and the drum unit.
NOTE: Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner.
Click here to see information for the order number of the toner cartridges.
If you believe the Toner Low: X message appeared too soon, consider the following:
- The toner cartridge that comes supplied with the machine are starter toner cartridges. The yield of the starter toner cartridge depends on the model and country where you bought the machine.
-
The number of pages that can be printed with a toner cartridge is affected by several factors, including paper size, number of pages per print job, amount of print on each page, font size, and print content, such as graphics, charts, etc.
The approximate toner yield is in accordance with ISO/IEC 19798.
