Model discontinued. This page is no longer updated.

HL-1850

FAQs & Troubleshooting

FAQs & Troubleshooting

JAM REAR

JAM REAR

 

Follow the instructions below to clear a paper jam:

 

  1. Press the Cover release button, and then open the Front cover.

     

  2. Pull the Drum unit assembly out of the printer.

     

     

    • We recommend that you put the Drum unit assembly on a piece of disposable paper or cloth so you don't accidentally spill or scatter toner.
    • To prevent damage to the printer caused by static electricity, do not touch the electrodes shown below.

     

     
  3. Pull the jammed paper out of the printer.

     

     

    If the paper jam can be cleared, go to Step 7.

     

     
  4. Open the Face up output tray.

     

    After you have just used the printer, some internal parts of the printer are extremely hot! Wait for the printer to cool down before you touch the internal parts of the printer.

     
  5. Open the Jam clear cover. Pull the jammed paper out of the fuser unit.

     

  6. Close the Jam clear cover. Close the Face up output tray.

     

  7.  Install the Drum unit assembly into the printer.

     

  8. Close the Front cover.

     

 
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1650, HL-1670N, HL-1850, HL-1870N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.