HL-1212W

FAQs & Troubleshooting

FAQs & Troubleshooting

Out of Memory

The Out of Memory message appears when the machine memory is full and the machine cannot print full pages of a document. When the Out of Memory message appears, the following LED indications is shown on the control panel. The Error LED (Error) will blink 4 times and turn off for 1 second.

OutOfMemory



Please follow the steps below to clear the Out of Memory message.


  • Press and hold power for about 2 seconds until all the LEDs light up and then release it. The machine will cancel the print job and clear it from the memory.

    The machine also cancels the print job and clears it from the memory automatically one minute after entering the Out of Memory state.


  • Reduce the complexity of your document or lower the print quality.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1112, HL-1212W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.