MFC-7460DN

FAQs & Troubleshooting

Toner specks

Please check the following points to solve the problem:

Make sure that you use paper that meets our specifications. Rough-surfaced paper may cause the problem.
Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"
Clean the corona wire and the drum unit.
Please refer to the FAQs "Clean the corona wire." and "Clean the drum unit."
The drum unit may be damaged.
Put in a new drum unit. Please refer to the FAQ "REPLACE DRUM".
The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us"

Click here to view other examples of print quality issues.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

DCP-7060D, DCP-7065DN, FAX-2840, HL-2280DW, HL-5440D, HL-5450DN, HL-5470DW, HL-6180DW, MFC-7240, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8710DW, MFC-8910DW, MFC-8950DW

Content Feedback

To help us improve our support, please provide your feedback below.

FAQs & Troubleshooting

Toner specks

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Content Feedback

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Support & Downloads

MFC-7460DN

Canada(English)