Model discontinued. This page is no longer updated.

DCP-8060

FAQs & Troubleshooting

FAQs & Troubleshooting

What kind of memory can I use?

This machine has 32 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs). When you add the optional memory, it increases the performance for both copier and printer operations.


In general, the DIMM must have the following specifications:

  • Type: 144 pin and 64 bit output
  • CAS Lantency: 2
  • Clock Frequency: 100 MHz or more
  • Capacity: 64, 128, 256 or 512 MB
  • Height: 31.75 mm (1.25 inches)
  • DRAM Type: SDRAM 2 Bank

This type of memory DIMM is available from most major memory suppliers.
The chart below lists two suppliers and their part numbers. 

 

   Buffalo Technology     128 MB            VN133-D128 / VN133-X128 
 256 MB            VN133-D256 
 512 MB            VN133-D512 
   TechWorks     64 MB            12165-0004  
 128 MB   12462-0001 
 256 MB   12485-0001 
 512 MB   12475-0001 

  • For more information, contact Brother Customer Service.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8060, MFC-8460N, MFC-8860DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.