MFC-J4335DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 06/11/2021
  • ID: faq00000105_527

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
image

  • This feature restores all wired (supported models only) and wireless network settings to the factory settings.

  • You can also reset the print server to its factory settings using Web Based Management.

MFC-J4335DW/MFC-J4345DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Network]. Press OK.
    2. Select [Network Reset]. Press OK.
  3. Press image for two seconds to confirm.
    The machine restarts.

MFC-J4535DW

  1. Press image[Settings]>[All Settings]>[Network]>[Network Reset].
  2. The reset confirmation message is displayed. Press [OK] for two seconds.
    The machine will restart.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J4335DW, MFC-J4345DWXL, MFC-J4535DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit