HL-4150CDN

ЧЗВ и отстраняване на неизправности

ЧЗВ и отстраняване на неизправности

Jam Rear

If a paper jam occurs behind the back cover, follow these steps:

  1. Leave the machine turned on for 10 minutes to cool down.

  2. Open the back cover.

    Image

    After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.

    Image




  3. Pull the green tabs (2) at the left and right hand sides toward you and fold down the fuser cover (1).

    Image

    If the envelope levers (3) inside the back cover are pulled down to the envelope position, lift these levers to the original position before pulling the green tabs (2) down.



  4. Using both hands, gently pull the jammed paper out of the fuser unit.

    Image
  5. Close the fuser cover (1).

    Image

    If you print on envelopes, pull down the envelope levers (2) to the envelope position again before closing the back cover.



  6. Close the back cover.

Проверихте ли в ръководствата?

Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:

Свързани модели

HL-4140CN, HL-4150CDN, HL-4570CDW

Обратна връзка за съдържанието

За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.

Стъпка 1: Как ви помага информацията на тази страница?

Стъпка 2: Искате ли да добавите коментар?

Имайте предвид, че този формуляр се използва само за обратна връзка.