DCP-J552DW
|
ЧЗВ и отстраняване на неизправности |
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
-
Make sure that the machine is turned on.
-
If you have already installed the Brother printer driver or scanner driver, uninstall them.
-
Connect the machine to your computer using a USB cable.
-
> Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
-
Make sure that the machines are turned on.
-
If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
-
Connect the machines to your computer using USB cables.
-
> Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
-
Install the Brother printer drivers and scanner drivers again.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
Проверихте ли в ръководствата?
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.