NC-7100w
 |
FAQ et Diagnostic |
I cannot see NC-7100w network name (SSID) "SETUP" in the list when using Mac OS X 10.1 to 10.3. What should I do?
If you are unable to see NC-7100w network name (SSID) "SETUP" in the list when using Mac OS X 10.1 to 10.3, check the following:
-
Move your printer with the print server installed closer to your PC and try again.
-
Reset the print server back to its default factory setting and try again. For information how to reset to factory default setting, click here.
-
Follow the steps below according to your operating system version, Mac OS X 10.1 to 10.3.
-
Click the AirPort status icon and select Open Internet Connect....
-
Select Create Network... from the Network option.
-
Enter SETUP, select 11 from the Channel option, and then click OK.
-
Your wireless network is connected successfully.
-
You can now use the Brother Wireless Setup Wizard to configure your print server settings.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
