TJ-4020TN
|
FAQ et Diagnostic |
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
Follow the instructions below:
-
Turn off the printer.
-
Press and hold the Pause button, and then turn on the printer.
-
For the Black Mark Sensor
Release the button when the LED is lit in green/amber (5 times) after the green LED blinks five times alternately.
For the Gap Sensor
Release the button when the LED is lit in red/amber (5 times) after the green/amber LED blinks five times alternately.
You can also calibrate by using the BPM (Brother Printer Management Tool).
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
TJ-4005DN, TJ-4020TN, TJ-4120TN
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.