SDX900
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
Care and Maintenance (Cleaning the Trimmer Blade)
Roll feeder is sold saperately.
If material debris, lint or dust accumulates inside the trimmer blade, it may no longer cut material. Periodically clean the trimmer blade.
Do not disassemble the trimmer blade.
Remove the trimmer blade from the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/eu_ot/en/2161155/faqh323_fig00004.gif) |
(1) Stopper |
-
Lightly push back on the stopper at the left end of the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/eu_ot/en/2161156/faqh323_fig00002.gif) |
(1) Stopper |
Do not push on the stopper with force. Otherwise, damage may result.
-
Slide the trimmer blade to the left end to remove it from the trimmer.
![image image](/g/b/img/faqend/faqh00101331_000/eu_ot/en/2161157/faqh323_fig00003.gif)
-
Using a commercially available brush, clean off debris, lint and dust.
![image image](/g/b/img/faqend/faqh00101331_000/eu_ot/en/2161154/faqh323_fig00001.gif)
-
Install the trimmer blade onto the trimmer.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.