CM700
![Veelgestelde vragen en probleemoplossing Veelgestelde vragen en probleemoplossing](/g/b/shared/img/module/icon_question_33.png) |
Veelgestelde vragen en probleemoplossing |
How can I properly emboss without the material tearing?
If the material tore, check the following, and then try again.
Possible Causes |
Solutions |
The embossing pressure is too strong. |
If the embossing pressure is too strong, the tool may press down on the material and tear it.
Decrease the embossing pressure. |
Thin paper is being used as the material to be embossed. |
Embossing is created by pressing the tool against the material. Thin paper may tear.
Use thick paper. |
The embossing speed is fast. |
If the embossing speed is too fast, paper may tear.
Decrease the speed, and then try again. |
Adjust the embossing pressure and inward offset in the settings screen for “Premium functions” or embossing screen.
![image](/g/s/hf/img/snc_faq/en/faqh480_fig0001-en.gif) |
or |
![image](/g/s/hf/img/snc_faq/en/faqh480_fig0002-en.gif) |
Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:
Heeft u de beschikbare handleidingen bekeken?
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Verwante modellen
CM260, CM300, CM600, CM700, CM840, CM900
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.