KD144
 |
FAQ et Diagnostic |
Why does the needle keep breaking?
There could be several reasons why the needle keeps breaking.
- Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.
- The needle could have been damaged or bent.
If so replace with a new one.
- Make sure the fabric is not pulled excessively when sewing.
Let the feed dogs move the fabric.
Do not pull the fabric.
- The combination of needle size, thread size and fabric is incorrect.
Be sure to use the correct needle and thread size for the fabric you are sewing.
(example: Denim-size 16 needle and 40-50 heavy duty thread).
One Point Advice Combination of fabric, thread and needle
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Modèles apparentés
AZ14, AZ17, BC-2100/2300, BC-2500, CS10, CS120WT, CS70, CS-8060, DS-120, DS-140, FS100WT, FS-20, FS-40, FS60, FS60s, FS70WT, FS70WTs, HF27, HF37, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J14s, J17, J17s, KD144, KD144s, KD40, KE14, KE14s, KE20, LS-1217, LS-2125, NX-200, NX-2000, NX-400Q/400, NX-600, PQ1600S, RH127, RH137, RL417, RL425, X14, X14s, X17, X17s, XL-5130/5232/5340, XL-5500, XL-5600, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37
