MFC-J4610DW
 |
FAQ et Diagnostic |
Print command (cupswrapper) (Linux)
Print Command :
lpr -P (printer name) [ -o Option] (filename)
You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W： brprintconf_mfcj430w
Option Table (Available option parameter depends on your model.)
| Category (available models only) |
Option Parameter Example |
| Media Type |
BRMediaType=Plain |
| Print Quality Paper Quality |
BRResolution=Normal BRResolution=Normal |
| Bi-Directional Printing |
BRBiDir=ON |
| Paper Type |
PageSize=A4 PageSize=BrA4 |
| Paper Thickness |
BRColorPaperThick=Thick |
| Paper Source |
BRInputSlot=AutoSelect |
| Color/Grayscale |
BRMonoColor=Color |
| Color Mode |
BRColorMatching=Natural |
| Change Data Transfer Mode |
BRJpeg=Recommended BRJpeg=Recommended |
| Half Tone Pattern |
BRHalfTonePattern=Diffusion |
| Color Enhancement |
BRColorEnhancement=ON BRColorEnhancement=ON |
| Slow Drying Paper |
BRSlowDrying=ON |
| Two-Sided |
Duplex=DuplexTumble |
| Advanced Duplex Settings |
BRDuplexMode=Duplex1 |
| Brightness |
BRBrightness=[-20 - +20] Brightness BRBrightness=[-20 - +20] |
| Contrast |
BRContrast=[-20 - +20] |
| Red Key |
BRRed=[-20 - +20] |
| Green Key |
BRGreen=[-20 - +20] |
| Blue Key |
BRBlue=[-20 - +20] |
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
DCP-J4110DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW, MFC-J6520DW, MFC-J6720DW, MFC-J6920DW
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
