ADS-2100

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

Multifeed

Multiple pages were fed at the same time.

 

Please follow the steps below to clear the multifeed.

  1. Remove any paper from the ADF(Automatic Document Feeder).
  2. Open the Front Cover by pulling the Cover Release Lever (1) toward you.

    Open the cover

     

  3. Pull the document out of the machine.

     

     

    Pull the document

     

    DO NOT touch the metal part of the Separation Pad Cover. Doing this may cause injury to you and serious damage to the machine.

    DO NOT touch

     

     

    Confirm that you completely removed all paper from the inside of your Brother machine before closing the Front Cover.

     
  4. Close the Front Cover.
  5. Press any key to clear the error indication.
  6. Confirm that the data scanned before the multifeed was detected has been saved, and then start scanning again at the next page or the beginning of the document.

    The data scanned before the multifeed occurred is not saved when scanning using the Scan to USB key on the control panel unless the file type is JPEG.

     

Multifeed occurs because of several reasons. If multifeed occurs repeatedly, check the following:

 

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Verwante modellen

ADS-2100, ADS-2100e

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.