MFC-9140CDN
![]() |
FAQ et Diagnostic |
Out of Memory
There are some cases when the machine's display shows the message Out of Memory. Follow the solution suitable for your case.
NOTE: Available functions differ depending on the models.
- Case 1: If a secure print operation (printing the secure data) is in process:
Press(Cancel) and delete the previously stored secure print data.
- Case 2: If a print operation is in process:
Do one of the following:
- Reduce the print resolution.
- Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.
- Reduce the print resolution.
- Case 3: If a fax sending or copy operation is in progress:
Do one of the following:
- Press Send Now, Partial Print or Quit to send or copy the scanned pages.
- Press
(Cancel) and wait until the other operations in progress finish, and then try again.
- Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.
- Press Send Now, Partial Print or Quit to send or copy the scanned pages.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.