DCP-L2520DW
 |
Veelgestelde vragen en probleemoplossing |
Jam Rear (With Video Instructions)
If the machine's control panel or the Status Monitor displays there is a jam in the back of the machine (Rear), do the following steps.
-
Open the back cover.
-
Pull the blue tabs at the left and right sides toward you to release the fuser cover.
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down touching them.
-
Use both hands to gently pull the jammed paper out of the fuser unit.
-
Close the fuser cover. Make sure the blue tabs at the left and right sides lock into place.
-
Close the back cover until it locks in the closed position.
If the paper is often jammed at the back of the machine, open the back cover and try printing documents.
Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:
Heeft u de beschikbare handleidingen bekeken?
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Verwante modellen
DCP-L2500D, DCP-L2520DW, DCP-L2540DN, DCP-L2560DW, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
