DCP-L2500D
 |
FAQ et Diagnostic |
Jam Rear (With Video Instructions)
If the machine's control panel or the Status Monitor displays there is a jam in the back of the machine (Rear), do the following steps.
-
Open the back cover.
-
Pull the blue tabs at the left and right sides toward you to release the fuser cover.
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down touching them.
-
Use both hands to gently pull the jammed paper out of the fuser unit.
-
Close the fuser cover. Make sure the blue tabs at the left and right sides lock into place.
-
Close the back cover until it locks in the closed position.
If the paper is often jammed at the back of the machine, open the back cover and try printing documents.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
DCP-L2500D, DCP-L2520DW, DCP-L2540DN, DCP-L2560DW, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
