DCP-J4110DW
 |
FAQ et Diagnostic |
Set the date and time.
Follow the steps below to set the date and time:
- Press Settings.
- Press the Up or Down arrow key to display Initial Setup.
- Press Initial Setup.
- Press Date & Time.
- Press Date & Time.
Enter the last two digits of the year on the Touchscreen, and then press OK. To move the cursor to the left, press
and re-enter the number.
(for example, enter 1 2 for 2012)
- Enter the two digits for the month on the Touchscreen, and then press OK.
- Enter the two digits for the day on the Touchscreen, and then press OK.
- To one of the following:
- If the Touchscreen prompt you to enter the "the time" after entering "the day".
Enter the time in 24-hour format (for example, enter 1, 5, 0, 0 for 3:00 pm).
- If the Touchscreen displays 12 h Clock or 24h Clock
Press 12h Clock or 24h Clock.
Enter the time on the Touchscreen.
Press
to cycle AM and PM. (12 Clock only)
- If the Touchscreen prompt you to enter the "the time" after entering "the day".
- Press OK, and then press
(Home).
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
