HL-5280DW

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing
  • Datum: 19/12/2005
  • Nummer: faq00000081_005

How do I disable the APIPA protocol?

If the APIPA protocol is enabled, the print server will automatically allocate a Link-Local IP address in the range (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the IP METHOD you have to set.

By default, the APIPA protocol is enabled. You can disable the APIPA protocol using the BRAdmin Professional utility or a web browser.

You can also disable the APIPA protocol using the control panel on the top of the printer. Please follow the steps below:


  1. Make sure that the front cover is closed and the power cord is plugged in.

  2. Turn on the printer and wait until the printer is in the Ready state.

  3. Press any of the Menu buttons (+, -, Set or Back) to take the printer off line.
  4. Press + or - until "NETWORK" appears on the LCD display.
  5. Press Set to proceed to the next menu level, and then press + or - until "APIPA" appears.
  6. Press Set to proceed to the next menu level, and then press + or - to select OFF. The APIPA protocol has been set to be disabled.

Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:

Heeft u de beschikbare handleidingen bekeken?

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.

Stap 1: is de informatie op deze pagina nuttig voor u?

Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden