MFC-J5730DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Set the Date and Time Using Web Based Management

Make sure the date and time and the time zone settings are set correctly using Web Based Management or the control panel, so the machine's time matches the time being used by the server providing authentication.

Start with Step 2 if you already have a Web Based Management window open.

  1. Start your web browser.
    Type "http://machine's IP address" or "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name).
    For example: http://192.168.1.2 or https://192.168.1.2
    If you have previously set a password, type it, and then click Right Arrow.
  2. Click the Administrator tab.
  3. Click the Date&Time menu in the left navigation bar.
    Date and Time
  4. In the Date fields, enter the date.
  5. Select either 12h Clock or 24h Clock as your Clock Type (available only for certain countries).
  6. In the Time fields, enter the time.
  7. Select the time difference between your location and UTC from the Time Zone drop-down list, for example, the time zone for Eastern time in the USA and Canada is UTC-05:00.
  8. Click the On option for Auto Daylight to set the machine to change automatically for daylight saving time. It will reset itself forward one hour in the spring, and back one hour in the fall/autumn (available only for certain countries).
  9. Click Submit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J1100DW, MFC-J1300DW, MFC-J5330DW, MFC-J5730DW, MFC-J5845DW, MFC-J5930DW, MFC-J5945DW, MFC-J6530DW, MFC-J6545DW, MFC-J6730DW, MFC-J6930DW, MFC-J6935DW, MFC-J6945DW, MFC-L2750DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.