MFC-J5730DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 09/05/2017
  • ID: faq00000157_501

Set Your Station ID

Set the machine's Station ID if you want the date and time to appear on each fax you send.

MFC-J2330DW/MFC-J5330DW

  1. Press [Settings]>[All Settings]>[Initial Setup]>[Station ID].
  2. Press [Fax].
  3. Enter your fax number (up to 20 digits) on the Touchscreen, and then press [OK].
  4. Press [Name].
  5. Enter your name (up to 20 characters) using the Touchscreen, and then press [OK].
    • Press to cycle between letters, numbers and special symbols. (The available characters may differ depending on your country.)
    • If you entered an incorrect character and want to change it, press or to move the cursor to it. Press and then enter the correct character.
    • To enter a space, press [Space].
  6. Press .

MFC-J2730DW/MFC-J5730DW/MFC-J5930DW

  1. Press [Settings]>[All Settings]>[Initial Setup]>[Station ID].
  2. Press [Fax].
  3. Enter your fax number (up to 20 digits) on the Touchscreen, and then press [OK].
  4. Press [Name].
  5. Enter your name (up to 20 characters) using the Touchscreen, and then press [OK].
    • Press to cycle between letters, numbers and special symbols. (The available characters may differ depending on your country.)
    • If you entered an incorrect character and want to change it, press or to move the cursor to it. Press and then enter the correct character.
    • To enter a space, press [Space].
  6. Press .

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J5330DW, MFC-J5730DW, MFC-J5930DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit