Model discontinued. This page is no longer updated.

HL-6050D

FAQs & Troubleshooting

FAQs & Troubleshooting

"JAM TRAY 1", "JAM TRAY2" error message appears on the LCD. What should I do?

Note: The LCD names for the paper trays are as follows.

 Tray type  Tray name
 Upper paper tray  TRAY 1
 Optional lower tray  TRAY2

 

If a paper jam occurs inside the paper tray, follow these steps:

 

  1. Pull the paper tray completely out of the printer.

  2. Use both hands to slowly pull out the jammed paper.

    If you cannot pull out a small piece of jammed paper, you can remove it by turning the dial, as shown below.

     
  3. Put paper below the maximum paper mark (t). While pressing the [blue] paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots.

  4. Put the paper tray firmly back in the printer.

  5. Open the front cover of the printer, and then close it to resume printing.

    Do not take out the upper paper tray while paper is feeding from a lower paper tray because this will cause a paper jam.

     
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-6050D, HL-6050DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.